How To Replace Rv Awning Fabric
Fix That Rv will be showing you how to replace rv awning fabric in just a few easy-to-follow steps! Rv awnings are great during summer bbq season. No one wants to hangout outside of their rv during the summer without some form of shade and sun protection. Follow along to our post and learn how to replace rv awning fabric!
Step One: Choose A New Rv Awning Fabric
The first step is to locate and choose a new fabric for your rv awning. It is always important to measure from rv awning arm to arm to determine the right length of fabric. Do not measure the old fabric itself. Next it is time to determine the material you would like for your awning. Typically the fabric comes in two different styles. Acrylic and Vinyl. Vinyl is much cheaper to replace and is great if you are looking for something water resistant. The downside of using vinyl is that this fabric does not have much breathability. Acrylic has much more breathability and allows air flow to move through it to keep you cooler on a hot summer day!
Step Two: Remove the Awning from the Rv or Trailer
Roll out the rv awning about a foot. Do not roll it out to maximum length. Next you need to remove the awning arms from the rv or travel trailer. To do this part, remove four bolts from the top of the rv awning arms and another four on the bottom of the actuators. After loosening those bolts, it is important to also remember to loosen the fabric channels. If you are unsure the fabric channels are on the top of the awning where the fabric actually slides into. After you locate the channels, loosen the bolts so the fabric can easily slide back and forth in between the channels. To remove the awning assembly gently lift up on the rv awning arms. If there is any sealant be sure to cut it off, so the awning is removable. Be sure when you lift the awning away from the rv that you don’t scratch the side of your rv or travel trailer.
Step Four: Remove the Awning Arms
On the back side of the awning (the side that does not have the extend/retract lever). There Should be a small hole on the end cap. Insert a small pick or screwdriver in the hole to lock the spring tension on this side.
Remove the bolt holding the arm to the bracket, then remove the arm from the roller. Be sure to keep a tight grip on the bracket while you remove the awning arm! The spring is still engaged and under tension.
Step Five: Take Tension Off of The Springs
There is bracket located on the top and bottom of the rv awning arms! Next, we need to twist the end bracket and the spring should start to release tension and move forward towards the end of the brackets!
Step Six: Remove caps and spring assembly
Remove the bolts and screws from the end cap. Simply slide the end caps and spring assembly and set it to the side.
Step Seven: Replace the Rv Awning Fabric
Next you need to slide the fabric out of the roller. It sometimes helps to take a razor knife and cut between the two vinyl cords. The two sections are easier to remove separately than together. Next, lay out your new fabric with the pattern facing the ground so you can find your end points. On one end, you’ll have two tubes. Work the fabric into the channels and slide it into place. This is obviously much easier to do with two people or more! Next center your fabric using a tape measure to measure each side. It helps to use silicone spray when installing new fabric into the channels.
Step Eight: Reinstall Awning Arms on the RV
Now it is time to reinstall the spring assembly and end caps. If you made marks to indicate the lever position, make sure to put the lever in the same position as before. Replace the bolts or screws. Have a helper hold the awning arm back in position so you can reinstall the bolt that holds it to the motor home. After both arms are reinstalled, we can now remove the pick releasing the spring.
Step Nine: Enjoy our new Rv Awning!!
Now it is time to enjoy your awning and your dedicated work. If you have any issues installing new Rv awning fabric, feel free to send us an email and we will do our best to help you troubleshoot!
ShadePro – RV Awning Fabric Replacement
- FABRIC FOR RV AWNINGS: Replace your old, worn-out RV awning fabric! ShadePro’s premium vinyl fabric will renew your canopy. The attractive solid print offers a seamless styling, while the heavyweight, weatherproof material provides reliable outdoor coverage from the sun, rain, and cold wherever you roam. Set includes awning fabric, install instructions, and a replacement pull strap.
- DURABLE VINYL CANOPY: Built for the great outdoors! ShadePro’s 13 Oz, the 3 ply premium-grade vinyl fabric resists UV and water and is cold-crack tested to -20°F. This ultra-durable, weatherproof material is reinforced with webbing at the stress points to prevent tattering and tearing in the elements.
Price: $129.00
VEVOR RV Awning, Awning Replacement Fabric 15 FT
- 15ft Awning Replacement: Our 15 ft brown fade RV awning replacement fabric is measured to be 14’2″, suitable for a 15′ awning. Compatible with almost all awnings of this size. And it is a necessary supplement for your RV accessories and works with most RV awnings in the market.
- Premium Vinyl Awnings: This RV replacement awning is made of 15 oz vinyl, with heat insulation and waterproof characteristics; keep the interior of your RV in a cool environment. And it is solid and durable enough to accompany your RV for a long time. And vinyl material is easier to clean, so you don’t have to worry so much about tree sap and dirt settling in to stay.
Price: $125.99
I can see how you should invest in your RV’s awning fabric so that you can enjoy the outdoors without worrying about the weather. I like how you pointed out that these awnings are usually replaceable and come in several colors. I should keep this in mind and share it with my dad if he pursues his plan of getting an RV.
I really like your writing style..Its so easily understandable. You can visit my blog at https://similar.my.id and then maybe you can share your thought about mine.