Rhino Tote Tank
The Design
The inside of the tote tank is smooth (so that it doesn’t trap odors or debris) and sloped toward the drain hole (making it easy to empty completely). The large, no-flat wheels have bearings to make them sturdier and have a large circumference to make going over rough terrain easier. The bottom of the tote tank features an integrated ladder hook and tie-down grooves, allowing you to hang the tank on your RV’s ladder when it is empty.
The top of the tote tank features two separate water inlets: one is an integrated tank rinse that can be used with a grey water hose. It has an easy grip connector, backflow preventer and multi-directional spray that helps clean away debris from the sidewalls of the interior of the tote tank. The other water inlet is a male connection that can be used with the included 15-inch female to female orange, grey water hose.
Using Your Rhino Tote Tank
|
|
|
|
|---|---|---|
Filling Your Tote TankWhen dumping your RV or trailer’s waste tank, you will need the clear double bayonet elbow and the 3-foot super heavy-duty sewer hose with bayonet and lug fittings. The clear elbow with double bayonet ends securely attaches to the waste inlet on the tote tank and allows you to see when your tanks are empty. The bayonet end of the sewer hose securely connects to your RV or trailer’s waste valve and has a gasket to ensure a secure seal. The lug end of the sewer hose connects to one of the bayonets ends of the elbow. All bayonet and lug end on the sewer hose and elbows swivel for easy use. Before filling the tote tank, attach the steel tow adapter, as it can be difficult to put in place after the tank is full. Remove the cap on the water inlet to vent air and make filling easier. Take care to not overfill the tote tank. |
Moving Your Tote TankAfter filling the tote tank, replace the waste inlet cap and water inlet cap, and make sure the tank rinse cap is tightly secured. These tote tanks have large, no-flat wheels for use on any terrain. They also feature a durable, oversized handle to make pulling the tote tank more ergonomic. If the tote tank is too heavy to transport manually when full, included is a removable steel tow adapter. It allows you to tow the tote tank slowly behind a truck or golf cart. |
Additional Tote Tank Usage Information
|
|
|
|
|---|---|---|
Emptying Your Tote TankWhen emptying your tote tank, you will need the included sewer hose and the bayonet to 4-in-1 clear elbow. The 4-in-1 adapter securely screws into any standard sized dump station sewer inlet. When you are ready to dump the tote tank, remove the waste cap on the tote tank waste inlet and securely attach the sewer hose to the tote tank and to the dump station sewer inlet. Remove the cap on the water inlet to allow airflow. Then, lift the tote tank from the handle end and allow the waste to flow out until empty. The low drain hole and smooth, sloped interior of the tote tank make emptying easy. Be sure to replace all caps before bringing the tote tank back to your campsite. |
Cleaning Your Tote TankThe Rhino Tote Tank features an integrated tank rinse water inlet that has a multi-directional spray to rinse the interior tank sidewalls. The tank rinse has a backflow preventer to keep contaminated water out of your hose. To rinse the tank, attach a grey water hose or a standard garden hose designated for sanitation use to the tank rinse. Using the easy grip connector, turn on the water and rinse. Alternatively, the included 15-inch female to female Rhino grey water hose can connect to the other water inlet/vent and any standard male water connection to fill and flush the tank with water more quickly than the rinse (but without the multi-directional spray). The vent/water inlet does not have a backflow preventer, so the included hose is bright orange to designate it as “Grey Water Use Only.” Once the tote tank has been thoroughly rinsed, the dirty water can be emptied in the same fashion that waste is emptied into a dump station. |
Storing Your Tote TankThe tote tank waste inlet, integrated tank rinse and water inlet all have designated caps, plus lanyards so that you don’t lose them. The 3-foot sewer hose compresses for storage and includes (2) storage caps to prevent drips during storage. The bottom of the tote tank has an integrated ladder hook to hang on your RV ladder. Only hang the tote tank on your RV ladder when it is empty. The body of the tote tank has grooves that are designed to accommodate tie-down straps. This helps you keep the tote tank in place while it hangs on the ladder. |
Rhino Tote Tank Key Features
|
|
|
|
|
|---|---|---|---|
Anti-Corrosion and Rust-Free HardwareAll hardware is zinc-plated to prevent rust and corrosion. The bearings on the wheels are stainless steel. |
Sturdy and Reliable Transporting WheelsThe large, no-flat wheels have bearings to make them sturdier. They have a large circumference to make going over rough terrain easier. |
Durable Build and Sturdy Oversized HandleThe handle is oversized and durable, allowing you to pull or tow the tote tank without worry. |
Distinctive Orange Color Tank Grey Water HoseIncludes a 15-inch female to female orange Rhino grey water hose. |
About Camco Manufacturing
Our Brands:
Our diverse flagship brands include Rhino, TastePURE, Hydro Life, TST, Power Grip, Eaz-Lift, Life is Better at the Campsite, FasTen, Black Boar, Currituck, Kuuma, Olympian, TRAC, Crooked Creek and Camping Essentials.
Camco makes quality products for RVing, boating, camping, towing, tailgating, grilling and more. Our products help take your passion for the outdoors to the next level.
At heart, Camco is a small company with big aspirations. Since 1966, we have earned a reputation for providing superior goods with high customer approval.
We also work with inventors, entrepreneurs and small businesses to bring innovative products into the marketplace.
At our core, we believe in manufacturing exceptional products and delivering superior service – all while providing a great customer experience.
Our company headquarters is located in Greensboro, North Carolina. Camco also has numerous manufacturing facilities in the United States and around the globe.
Explore your outdoor passion with Camco. Great memories are only an adventure away.
Portable waste holding tank is constructed of extremely durable blow molded, UV stabilized HDPE that won’t leak or deteriorate in the sun. Ready to use kit includes everything needed to transport waste from your RV or trailer to a dump station when you’re parked too far away for an RV sewer hose. Kit includes accessories to clean, maintain and store the tote tank when not in use. Large, heavy duty, no flat wheels with bearings make transporting the tow tank smooth and effortless. The removable steel tow adapter allows you to easily roll the tote tank as you would with a suitcase or luggage. You can also transport it by towing it slowly behind a golf cart or truck.
Reviews
There are no reviews yet.